Evaluation of rheological properties of mortar with TiO2 addition

Evaluation of rheological properties of mortar with TiO2 addition

Adding TiO2 to coating mortars is carried out to promote self-cleaning through photocatalytic activity. However, this addition influences the workability of the mortar and, consequently, the application stage as the TiO2 used can present a large number of fine particles and a high surface area, incr...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autors principals:	Dantas, Sérgio Roberto Andrade, Lima, Francisco Jordão Nunes de, Romano, Roberto Cesar de Oliveira, Pileggi, Rafael, Loh, Kai
Format:	Online
Idioma:	eng
Publicat:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2021
Accés en línia:	https://seer.ufrgs.br/ambienteconstruido/article/view/105816
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

The effectiveness of TiO2 additions to mortar to maintain initial conditions in terms of its reflectance to solar radiation
per: Dantas, Sérgio Roberto Andrade, et al.
Publicat: (2017)

Influence of polypropylene microfibre (PPMF) dispersion procedure on fresh and hardened rendering mortar properties
per: Dantas, Sérgio Roberto Andrade, et al.
Publicat: (2020)

Efeito da incorporação de resíduo de TiO2 (MNR) na formação das fases mineralógicas de clínquer Portland
per: Mariani, Bruna Bueno, et al.
Publicat: (2018)

Comparative analysis of the properties of composite mortar with addition of rubber powder from worn tires
per: Canova, José Aparecido, et al.
Publicat: (2012)

Impact of the mixer and time of mixing on the properties of industrialized mortar
per: Romano, Roberto Cesar de Oliveira, et al.
Publicat: (2009)

Rheological characterization of cement paste: association of complementary techniques
per: Betioli, Andrea Murillo, et al.
Publicat: (2009)

Shrinkage and the development of mechanical properties in rendering mortars
per: Bastos, Pedro Kopschitz Xavier, et al.
Publicat: (2008)

Correlation between modulus of elasticity dynamic and mechanical strengths of cement mortars and sand with lime addition
per: Silva, Narciso Gonçalves da, et al.
Publicat: (2008)

Influence of cement type and water content on the fresh state properties of ready mix mortar
per: Casali, Juliana Machado, et al.
Publicat: (2018)

Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
per: Silva, Deborah Grasielly Cipriano da, et al.
Publicat: (2019)

Influência da utilização de diferentes teores de lama vermelha nas propriedades de ladrilhos hidráulicos
per: Romano, Roberto Cesar de Oliveira, et al.
Publicat: (2020)

Viabilidade do emprego de agentes retardadores em substituição aos desmoldantes convencionais na moldagem de concreto para aplicação de argamassas de revestimento
per: Assali, Mirella Pennacchi, et al.
Publicat: (2011)

Use of natural additives in construction materials – a review
per: Hernández, Eddisson
Publicat: (2019)

Reliability of the ultrasonic pulse velocity for analysis and comparison of the compression strength of conventional concrete with addition of steel fiber and polypropylene
per: Jaramillo Machacua, Honorio Rigoberto, et al.
Publicat: (2023)

Evaluation of early age cracking in rendering mortars with polypropylene fibers
per: Monte, Renata, et al.
Publicat: (2018)

Using ready-mixed mortars in concrete block structural masonry
per: Matos, Paulo Ricardo de, et al.
Publicat: (2020)

Drying parameters of rendering mortars
per: Salomão, Maria Cláudia de Freitas, et al.
Publicat: (2018)

Editorial V4 | N2
per: Amorim, Sérgio Roberto Leusin
Publicat: (2009)

Statistical analysis of test methods to evaluate rendering surface properties
per: Carasek, Helena, et al.
Publicat: (2018)

Study of the influence of the mortar fine recycled aggregate ratio and the mixing sequence on the behavior of new mortars
per: Silva Neto, Gilberto Alves da, et al.
Publicat: (2018)

Use of adherent additives in designing asphalt hot mixtures: a review
per: Vasquez Llamo, Reinerio Elden, et al.
Publicat: (2021)

Structural reinforcement in townhouses by covering masonry with welded mesh and mortar
per: Castillo Robles, Cristhian, et al.
Publicat: (2022)

Incorporação de ar em materiais cimentícios: uma nova abordagem para o desenvolvimento de argamassas de revestimento
per: Romano, Roberto Cesar de Oliveira, et al.
Publicat: (2018)

Pintura à base de cal como alternativa de revestimento frio
per: Werle, Ana Paula, et al.
Publicat: (2014)

High quality of mortar with marble waste aggregate
per: Barbosa, Maria Teresa Gomes, et al.
Publicat: (2018)

Mortar with refractory waste for passive fire protection
per: Lima, Paulo Henrique Pereira, et al.
Publicat: (2020)

Binders, mortars and plasters appropriate to protect the environment.
per: Cedeño Valdiviezo, Alberto
Publicat: (2011)

Energy properties of window technologies in Argentina
per: de Gastines, Maureen, et al.
Publicat: (2019)

Editorial V16 N2
per: Ornstein, Sheila Walbe, et al.
Publicat: (2021)

Environmental and economic perspectives of concrete with high mineral addition content: a case study
per: Isaia, Geraldo Cechella, et al.
Publicat: (2008)

Influence of the addition of “synthetic termite saliva” in the compressive strength and water absorption of compacted soil-cement
per: Faria, Obede Borges, et al.
Publicat: (2016)

Comparative study of the chemical additives Consolid 444 and Con-Aid for the improvement of the subgrade in clay soils
per: Guevara Camus, Junior Jeampier, et al.
Publicat: (2023)

Efeito da adição de látex nas pastas de cimento branco no estado endurecido
per: Carbone, Carlos Eduardo, et al.
Publicat: (2013)

Strategic planning in property development: market evidences
per: Balarine, Oscar Fernando Osório
Publicat: (2008)

PROCESS MANAGEMENT ANALYSIS CUSTOMIZATION OF RESIDENTIAL PROPERTIES
per: Pagliaroni, Marco Aurellio Polenghi, et al.
Publicat: (2017)

Lime-based restoration paints: characterization and evaluation of formulations using a native species from the Amazon flora and PVA-based glue as additives
per: Silva, Mayra Martins, et al.
Publicat: (2017)

Evaluation of the petatillo made with cement-sand mortar as an alternative material for the construction of the prefabricated roof component Domotej
per: González García, Eddy, et al.
Publicat: (2018)

EDITORIAL VOLUME12 NÚMERO 2 (2017)
per: Ornstein, Sheila Walbe, et al.
Publicat: (2017)

Efeito da absorção de água e do tipo de substrato no desempenho de argamassa de revestimento nos estados fresco e endurecido
per: Bernardo, Heitor Montefusco, et al.
Publicat: (2020)

Caracterização reológica de suspensões cimentícias mistas com cales ou filitos
per: Romano, Roberto Cesar de Oliveira, et al.
Publicat: (2014)