Standardization of adhesives for tiles and grouts for ceramic tiles

Standardization of adhesives for tiles and grouts for ceramic tiles

This paper discusses the standardization of adhesives for tiles and grouts for ceramic tiles. An experimental study was conducted on grouts for tiles in order to determine consistency and water retention rates, flexural and compressive strength, water absorption by capillary and the permeability of...

Cur síos iomlán

Saved in:

Sonraí Bibleagrafaíochta
Main Authors:	Bauer, Roberto José Falcão, Rago, Fabíola
Formáid:	Online
Teanga:	por
Foilsithe:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2008
Rochtain Ar Líne:	https://seer.ufrgs.br/ambienteconstruido/article/view/3419
Clibeanna:	Cuir Clib Leis Gan Chlibeanna, Bí ar an gcéad duine leis an taifead seo a chlibeáil!

Míreanna Comhchosúla

Performance of grouts in the wall tiling system
le: Paes, Isaura Nazaré Lobato, et al.
Foilsithe: (2008)

The influence of water loss by evaporation in the tensile adhesion strength between dry-set mortar and ceramic tiles
le: Póvoas, Yêda Vieira, et al.
Foilsithe: (2008)

Analysis of the stresses in the interface between dry-set mortar and ceramic tiles under thermic efforts
le: Saraiva, Ana Gabriela, et al.
Foilsithe: (2008)

Application of the NORIE-LACER-LOPP model for estimating the life cycle of glazed ceramic tiles under abrasion
le: Abitante, Ana Luiza Raabe, et al.
Foilsithe: (2008)

Estimating the embodied energy in ceramic bricks, blocks and tile production materials in the State of Rio Grande do Sul
le: Manfredini, Constance, et al.
Foilsithe: (2008)

Modern ornaments: portinary's tiles in Pampulha church
le: Pinto Junior, Rafael Alves
Foilsithe: (2008)

Iron ore tailings in the production of cement tiles: a value analysis on building sustainability
le: Fontes, Wanna Carvalho, et al.
Foilsithe: (2018)

Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
le: Valle, Ângela do, et al.
Foilsithe: (2019)

Cruz Azul and Tolteca: Cement Standardization and Biopolitics in Post-Revolutionary Advertising
le: Hernandez Flores, Fabiola
Foilsithe: (2020)

Castor oil based polyurethane adhesive content on OSSB produced with soybean straw
le: Silva, João Vítor Felippe, et al.
Foilsithe: (2020)

Reliability analysis applied to structural ceramic blocks
le: Souza, Daniel de Andrade, et al.
Foilsithe: (2018)

Standards for the Need of Equipments?
le: Pavez Reyes, María Isabel
Foilsithe: (1998)

Portlandite consumption by red ceramic waste due to alkali activation reaction
le: Macioski, Gustavo, et al.
Foilsithe: (2020)

Soil characterisation used in ceramic industries and an analysis of its feasibility in ecological bricks
le: Queiroz, Abílio José Procópio, et al.
Foilsithe: (2021)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
le: Oliveira, Maria Fernanda de, et al.
Foilsithe: (2021)

Analysis of artificial lighting standards for residential buildings
le: Moraes, Júlia Silva de, et al.
Foilsithe: (2018)

Study of the hydration of Portland cement pastes containing ceramic waste by thermal analysis
le: Gonçalves, Jardel Pereira, et al.
Foilsithe: (2008)

Environmental strategies for the red ceramic industry from the State of Rio Grande do Sul
le: Grigoletti, Giane de Campos, et al.
Foilsithe: (2008)

Study of minimum standards of flexibility for social housing in Bogotá.
le: Cubillos González, Rolando Arturo
Foilsithe: (2012)

Living (in) the house. Changes in the transforming standards and values in the constructed surroundings
le: Di Paula, Jorge
Foilsithe: (2007)

Development of plug-ins focused on analyzing requirements of the Brazilian Performance Standard
le: Silva, Juliano Lima da, et al.
Foilsithe: (2019)

Space standards that apply to the construction of social housing: a comparison between Portugal and the municipality of São Paulo
le: Pedro, João Branco, et al.
Foilsithe: (2012)

New requirements resulting from construction environmental certification programs and performance standards
le: Silva, Adriana Teresinha, et al.
Foilsithe: (2015)

RESIDENTIAL BUILDING DESIGN CONSIDERING THE BRAZILIAN PERFORMANCE STANDARD: ANALYSES TO WALL PARTITION
le: Oliveira, Luciana Alves, et al.
Foilsithe: (2012)

Climate parameters for thermal performance simulation according to the Brazilian standard NBR 15.575
le: Guarda, Emeli Lalesca Aparecida da, et al.
Foilsithe: (2020)

Municipal environment and conservation standards in Colombia: ¿protected areas, ecological networks or green infrastructures?
le: Remolina-Angarita, Fernando
Foilsithe: (2011)

Determination of sky models from ISO CIE 15469- 2004 standard using climate files
le: Claro, Anderson
Foilsithe: (2018)

Efficiency evaluation of grease traps prescribed by the Brazilian standard NBR 8160:1999 as natural flotation basins
le: Gnipper, Sérgio Frederico
Foilsithe: (2008)

From Minimum Quality Standards to project strategies: disciplinary contributions to the technical parameters of Social Housing in Argentina
le: Fiscarelli, Diego; Laboratorio de Tecnología y Gestión Habitacional LATEC. Facultad de Arquitectura y Urbanismo. UNLP, et al.
Foilsithe: (2020)

Performance ratings of impact noise insulation materials using the tapping machine and a non-standardized source
le: Panosso, Andriele da Silva, et al.
Foilsithe: (2020)

The social interest housing decrees and the loosening of land use standards in the city of São Paulo from 1992 to 2016
le: Teixeira, Catharina Christina
Foilsithe: (2018)

Study of low-income housing and low-income market housing in the zeis (special zones of social interest) in the lapa district of sao paulo, brazil, following the 2002 master plan
le: Falcão Pessoa, Denise
Foilsithe: (2009)

On the Visual Agency of Manufacturing Models
le: Bauer, Frank
Foilsithe: (2021)

Demand for material in regular steel structures with and without braces in seismic zone in high risk according to the Standard Covenin 1618-1998
le: Montesinos, Vanessa Viviana, et al.
Foilsithe: (2015)

Program Kaiser Connex for Kaiser Bolted Bracket type seismo-resistant connections according to the ansi/aisc 358-16 standard
le: Chirino Alvarado, Kevin Jesús, et al.
Foilsithe: (2023)

QUALI-QUANTITATIVE ANALYSIS OF THE BRAZILIAN PERFORMANCE STANDARD (NBR no. 15,575/2013) AND MAIN CHALLENGES FOR UPPER LEVEL IMPLEMENTATION ON RESIDENTIAL MULTIFLOOR BUILDINGS
le: Souza, Jonas Leonardo Pessanha de, et al.
Foilsithe: (2018)

Comparative analysis of the structural design of a regular and irregular building of eight levels in a ports system applying standard E.030 2003, 2016 and 2018 seismic resistant design in the city of Lima
le: De La Cruz Alvarez, Jorge Eduardo, et al.
Foilsithe: (2022)

Evaluation of methods for measuring driving rain on buildings facades
le: Zanoni, Vanda Alice Garcia, et al.
Foilsithe: (2018)

O virtual de baixa resolução: entre a visibilidade e a ilusão
le: Ribeiro, Fabíola Macêdo
Foilsithe: (2007)

Homely Town. Modelo Habitacional Moín
le: Sanabria Hidalgo, Fabiola
Foilsithe: (2017)