Physical-mechanical performance criteria of cement-soil mortars for earth building coating

Physical-mechanical performance criteria of cement-soil mortars for earth building coating

Soil as a mortar aggregate may improve the physical-mechanical compatibility between the coating system and earth-wall substrate, as well as present greater durability when stabilised with cement. Based on these concepts, the physical-mechanical behaviour of mortars comprising soil, cement, lime and...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Main Authors:	Milani, Ana Paula da Silva, Dias, Flávia Gaspar Rangel
Format:	Online
Sprog:	eng
Udgivet:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2018
Online adgang:	https://seer.ufrgs.br/ambienteconstruido/article/view/72000
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Correlation between modulus of elasticity dynamic and mechanical strengths of cement mortars and sand with lime addition
af: Silva, Narciso Gonçalves da, et al.
Udgivet: (2008)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
af: Oliveira, Maria Fernanda de, et al.
Udgivet: (2021)

Performance of tall buildings with employment of soil-structure interaction
af: Bahia, Gabriela de Athayde Duboc, et al.
Udgivet: (2021)

Shrinkage and the development of mechanical properties in rendering mortars
af: Bastos, Pedro Kopschitz Xavier, et al.
Udgivet: (2008)

Evaluation of the incorporation of construction waste (CW) for the stabilization of soil-cement mixtures
af: Souza, Juliana Maria de, et al.
Udgivet: (2020)

Sustainable house construction with soil cement blocks : from waste to material.
af: Bedoya-Montoya, Carlos Mauricio
Udgivet: (2018)

Checking performance criteria in architectural design with BIM
af: Silva Junior, Mauro Augusto, et al.
Udgivet: (2018)

Ventilated cladding systems: structural and drainability performance criteria
af: Silva, Luiz Fernando Batista da, et al.
Udgivet: (2018)

Physical and mechanical properties of Eucalyptus saligna wood for timber structures
af: Nogueira, Marta Cristina de Jesus Albuquerque, et al.
Udgivet: (2019)

Physics mechanics and chemical evaluation on walls used after fire
af: Valero, Diana, et al.
Udgivet: (2015)

Porosity estimation of cement-lime mortar through the volume calculation method
af: Quarcioni, Valdecir Angelo, et al.
Udgivet: (2009)

Physical and mechanical properties of bricks with dust residue from marble in México. Physical and mechanical properties of the marble dust-residue from the Comarca Lagunera Province, in Mexico
af: Ponce-Palafox, Cesar, et al.
Udgivet: (2020)

Comparative analysis of the thermal aspects and mechanical resistances for materials and elements with earth.
af: Cuitiño-Rosales, María Guadalupe, et al.
Udgivet: (2020)

Comparison of physical and mechanical properties of traditional concrete and with recycled metal fibers
af: Huamán Changa, Marilyn Del Rosario, et al.
Udgivet: (2022)

Influence of the addition of “synthetic termite saliva” in the compressive strength and water absorption of compacted soil-cement
af: Faria, Obede Borges, et al.
Udgivet: (2016)

Thermal performance of light earth building envelope : possibilities of application in the peruvian territory.
af: Wieser, Martín, et al.
Udgivet: (2020)

Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
af: Silva, Deborah Grasielly Cipriano da, et al.
Udgivet: (2019)

Influence of cement type and water content on the fresh state properties of ready mix mortar
af: Casali, Juliana Machado, et al.
Udgivet: (2018)

Method for obtaining the independency between strength and elasticity in proportioning studies of cement and lime mortar
af: Dafico, Dario de Araújo
Udgivet: (2008)

Influence of the physical-mechanical properties in the establishment of the coincidence frequency in the sound isolation of masonry walls
af: Paixão, Dinara Xavier da, et al.
Udgivet: (2008)

Mechanical physical study of concrete substitutes with silica powder exposed in simulated aggressive environment
af: Giménez, Alejandro, et al.
Udgivet: (2018)

Compressed Earth Blocks (CEB) stabilized with lime and cement. Evaluation of both their environmental impact and compressive strength
af: Cabrera, Santiago Pedro, et al.
Udgivet: (2020)

Earth construction in Brazil: environmental assessment of rammed earth
af: Caldas, Lucas Rosse, et al.
Udgivet: (2021)

Evaluation of the petatillo made with cement-sand mortar as an alternative material for the construction of the prefabricated roof component Domotej
af: González García, Eddy, et al.
Udgivet: (2018)

Reuse of gypsum waste in the execution of internal coating of partition walls
af: Schmitz, Ítalo Benjamin, et al.
Udgivet: (2009)

Design criteria for educational buildings in the state of Zulia, Venezuela
af: Portillo Ríos, Raymundo
Udgivet: (2016)

Evaluation of mechanical behavior of ABS and PLA polymers in 3D printing for structural performance simulation
af: Martinez, Andressa Carmo Pena, et al.
Udgivet: (2019)

Between arms and coats of arms: a look at the railroad development in the interior of São Paulo
af: Ribeiro, Eduardo Bacani
Udgivet: (2021)

Cool roof coating effect on the superficial temperature of rooftops in a warm and humid weather
af: Porras-Salazar, José Alí, et al.
Udgivet: (2019)

SAMBA RECEPTION DESK: COMPROMISING AESTHETICS, FABRICATION AND STRUCTURAL PERFORMANCE WITH THE USE OF VIRTUAL AND PHYSICAL MODELS IN THE DESIGN PROCESS
af: Barbosa Neto, Wilson, et al.
Udgivet: (2014)

The stabilized rammed earth building technique and its use in Australia
af: do Prado Rocha, Rodrigo Amaral, et al.
Udgivet: (2019)

Transformation in uses of soil in Barbosa. The case of recreational farms
af: Restrepo Uribe, Alejandro, et al.
Udgivet: (2017)

Drying parameters of rendering mortars
af: Salomão, Maria Cláudia de Freitas, et al.
Udgivet: (2018)

Earth architecture: An alternative for sustainable construction
af: Zuleta Roa, Gloria
Udgivet: (2011)

Integration of earth and lime in architectural restorations
af: Guerrero Baca, Luis Fernando, et al.
Udgivet: (2021)

Modelling proposal for the carbonation of white portland cement concrete
af: Kirchheim, Ana Paula, et al.
Udgivet: (2008)

Study of the influence of the mortar fine recycled aggregate ratio and the mixing sequence on the behavior of new mortars
af: Silva Neto, Gilberto Alves da, et al.
Udgivet: (2018)

From the mechanical to the plastic
af: de Esteban Garbayo, Javier
Udgivet: (2018)

Eight criteria for practice-based research in the creative and cultural industries
af: Büchler, Daniela, et al.
Udgivet: (2010)

Historical approach to the origins of rammed earth building in Mexico during the sixteenth century
af: Tepale Gamboa, Blas Antonio, et al.
Udgivet: (2021)