Physical-mechanical performance criteria of cement-soil mortars for earth building coating

Physical-mechanical performance criteria of cement-soil mortars for earth building coating

Soil as a mortar aggregate may improve the physical-mechanical compatibility between the coating system and earth-wall substrate, as well as present greater durability when stabilised with cement. Based on these concepts, the physical-mechanical behaviour of mortars comprising soil, cement, lime and...

Description complète

Enregistré dans:

Détails bibliographiques
Auteurs principaux:	Milani, Ana Paula da Silva, Dias, Flávia Gaspar Rangel
Format:	Online
Langue:	eng
Publié:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2018
Accès en ligne:	https://seer.ufrgs.br/ambienteconstruido/article/view/72000
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Correlation between modulus of elasticity dynamic and mechanical strengths of cement mortars and sand with lime addition
par: Silva, Narciso Gonçalves da, et autres
Publié: (2008)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
par: Oliveira, Maria Fernanda de, et autres
Publié: (2021)

Performance of tall buildings with employment of soil-structure interaction
par: Bahia, Gabriela de Athayde Duboc, et autres
Publié: (2021)

Shrinkage and the development of mechanical properties in rendering mortars
par: Bastos, Pedro Kopschitz Xavier, et autres
Publié: (2008)

Evaluation of the incorporation of construction waste (CW) for the stabilization of soil-cement mixtures
par: Souza, Juliana Maria de, et autres
Publié: (2020)

Sustainable house construction with soil cement blocks : from waste to material.
par: Bedoya-Montoya, Carlos Mauricio
Publié: (2018)

Checking performance criteria in architectural design with BIM
par: Silva Junior, Mauro Augusto, et autres
Publié: (2018)

Ventilated cladding systems: structural and drainability performance criteria
par: Silva, Luiz Fernando Batista da, et autres
Publié: (2018)

Physical and mechanical properties of Eucalyptus saligna wood for timber structures
par: Nogueira, Marta Cristina de Jesus Albuquerque, et autres
Publié: (2019)

Physics mechanics and chemical evaluation on walls used after fire
par: Valero, Diana, et autres
Publié: (2015)

Porosity estimation of cement-lime mortar through the volume calculation method
par: Quarcioni, Valdecir Angelo, et autres
Publié: (2009)

Physical and mechanical properties of bricks with dust residue from marble in México. Physical and mechanical properties of the marble dust-residue from the Comarca Lagunera Province, in Mexico
par: Ponce-Palafox, Cesar, et autres
Publié: (2020)

Comparative analysis of the thermal aspects and mechanical resistances for materials and elements with earth.
par: Cuitiño-Rosales, María Guadalupe, et autres
Publié: (2020)

Comparison of physical and mechanical properties of traditional concrete and with recycled metal fibers
par: Huamán Changa, Marilyn Del Rosario, et autres
Publié: (2022)

Influence of the addition of “synthetic termite saliva” in the compressive strength and water absorption of compacted soil-cement
par: Faria, Obede Borges, et autres
Publié: (2016)

Thermal performance of light earth building envelope : possibilities of application in the peruvian territory.
par: Wieser, Martín, et autres
Publié: (2020)

Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
par: Silva, Deborah Grasielly Cipriano da, et autres
Publié: (2019)

Influence of cement type and water content on the fresh state properties of ready mix mortar
par: Casali, Juliana Machado, et autres
Publié: (2018)

Method for obtaining the independency between strength and elasticity in proportioning studies of cement and lime mortar
par: Dafico, Dario de Araújo
Publié: (2008)

Influence of the physical-mechanical properties in the establishment of the coincidence frequency in the sound isolation of masonry walls
par: Paixão, Dinara Xavier da, et autres
Publié: (2008)

Mechanical physical study of concrete substitutes with silica powder exposed in simulated aggressive environment
par: Giménez, Alejandro, et autres
Publié: (2018)

Compressed Earth Blocks (CEB) stabilized with lime and cement. Evaluation of both their environmental impact and compressive strength
par: Cabrera, Santiago Pedro, et autres
Publié: (2020)

Earth construction in Brazil: environmental assessment of rammed earth
par: Caldas, Lucas Rosse, et autres
Publié: (2021)

Evaluation of the petatillo made with cement-sand mortar as an alternative material for the construction of the prefabricated roof component Domotej
par: González García, Eddy, et autres
Publié: (2018)

Reuse of gypsum waste in the execution of internal coating of partition walls
par: Schmitz, Ítalo Benjamin, et autres
Publié: (2009)

Design criteria for educational buildings in the state of Zulia, Venezuela
par: Portillo Ríos, Raymundo
Publié: (2016)

Evaluation of mechanical behavior of ABS and PLA polymers in 3D printing for structural performance simulation
par: Martinez, Andressa Carmo Pena, et autres
Publié: (2019)

Between arms and coats of arms: a look at the railroad development in the interior of São Paulo
par: Ribeiro, Eduardo Bacani
Publié: (2021)

Cool roof coating effect on the superficial temperature of rooftops in a warm and humid weather
par: Porras-Salazar, José Alí, et autres
Publié: (2019)

SAMBA RECEPTION DESK: COMPROMISING AESTHETICS, FABRICATION AND STRUCTURAL PERFORMANCE WITH THE USE OF VIRTUAL AND PHYSICAL MODELS IN THE DESIGN PROCESS
par: Barbosa Neto, Wilson, et autres
Publié: (2014)

The stabilized rammed earth building technique and its use in Australia
par: do Prado Rocha, Rodrigo Amaral, et autres
Publié: (2019)

Transformation in uses of soil in Barbosa. The case of recreational farms
par: Restrepo Uribe, Alejandro, et autres
Publié: (2017)

Drying parameters of rendering mortars
par: Salomão, Maria Cláudia de Freitas, et autres
Publié: (2018)

Earth architecture: An alternative for sustainable construction
par: Zuleta Roa, Gloria
Publié: (2011)

Integration of earth and lime in architectural restorations
par: Guerrero Baca, Luis Fernando, et autres
Publié: (2021)

Modelling proposal for the carbonation of white portland cement concrete
par: Kirchheim, Ana Paula, et autres
Publié: (2008)

Study of the influence of the mortar fine recycled aggregate ratio and the mixing sequence on the behavior of new mortars
par: Silva Neto, Gilberto Alves da, et autres
Publié: (2018)

From the mechanical to the plastic
par: de Esteban Garbayo, Javier
Publié: (2018)

Eight criteria for practice-based research in the creative and cultural industries
par: Büchler, Daniela, et autres
Publié: (2010)

Historical approach to the origins of rammed earth building in Mexico during the sixteenth century
par: Tepale Gamboa, Blas Antonio, et autres
Publié: (2021)