Physical-mechanical performance criteria of cement-soil mortars for earth building coating

Physical-mechanical performance criteria of cement-soil mortars for earth building coating

Soil as a mortar aggregate may improve the physical-mechanical compatibility between the coating system and earth-wall substrate, as well as present greater durability when stabilised with cement. Based on these concepts, the physical-mechanical behaviour of mortars comprising soil, cement, lime and...

Volledige beschrijving

Bewaard in:

Bibliografische gegevens
Hoofdauteurs:	Milani, Ana Paula da Silva, Dias, Flávia Gaspar Rangel
Formaat:	Online
Taal:	eng
Gepubliceerd in:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2018
Online toegang:	https://seer.ufrgs.br/ambienteconstruido/article/view/72000
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Gelijkaardige items

Correlation between modulus of elasticity dynamic and mechanical strengths of cement mortars and sand with lime addition
door: Silva, Narciso Gonçalves da, et al.
Gepubliceerd in: (2008)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
door: Oliveira, Maria Fernanda de, et al.
Gepubliceerd in: (2021)

Performance of tall buildings with employment of soil-structure interaction
door: Bahia, Gabriela de Athayde Duboc, et al.
Gepubliceerd in: (2021)

Shrinkage and the development of mechanical properties in rendering mortars
door: Bastos, Pedro Kopschitz Xavier, et al.
Gepubliceerd in: (2008)

Evaluation of the incorporation of construction waste (CW) for the stabilization of soil-cement mixtures
door: Souza, Juliana Maria de, et al.
Gepubliceerd in: (2020)

Sustainable house construction with soil cement blocks : from waste to material.
door: Bedoya-Montoya, Carlos Mauricio
Gepubliceerd in: (2018)

Checking performance criteria in architectural design with BIM
door: Silva Junior, Mauro Augusto, et al.
Gepubliceerd in: (2018)

Ventilated cladding systems: structural and drainability performance criteria
door: Silva, Luiz Fernando Batista da, et al.
Gepubliceerd in: (2018)

Physical and mechanical properties of Eucalyptus saligna wood for timber structures
door: Nogueira, Marta Cristina de Jesus Albuquerque, et al.
Gepubliceerd in: (2019)

Physics mechanics and chemical evaluation on walls used after fire
door: Valero, Diana, et al.
Gepubliceerd in: (2015)

Porosity estimation of cement-lime mortar through the volume calculation method
door: Quarcioni, Valdecir Angelo, et al.
Gepubliceerd in: (2009)

Physical and mechanical properties of bricks with dust residue from marble in México. Physical and mechanical properties of the marble dust-residue from the Comarca Lagunera Province, in Mexico
door: Ponce-Palafox, Cesar, et al.
Gepubliceerd in: (2020)

Comparative analysis of the thermal aspects and mechanical resistances for materials and elements with earth.
door: Cuitiño-Rosales, María Guadalupe, et al.
Gepubliceerd in: (2020)

Comparison of physical and mechanical properties of traditional concrete and with recycled metal fibers
door: Huamán Changa, Marilyn Del Rosario, et al.
Gepubliceerd in: (2022)

Influence of the addition of “synthetic termite saliva” in the compressive strength and water absorption of compacted soil-cement
door: Faria, Obede Borges, et al.
Gepubliceerd in: (2016)

Thermal performance of light earth building envelope : possibilities of application in the peruvian territory.
door: Wieser, Martín, et al.
Gepubliceerd in: (2020)

Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
door: Silva, Deborah Grasielly Cipriano da, et al.
Gepubliceerd in: (2019)

Influence of cement type and water content on the fresh state properties of ready mix mortar
door: Casali, Juliana Machado, et al.
Gepubliceerd in: (2018)

Method for obtaining the independency between strength and elasticity in proportioning studies of cement and lime mortar
door: Dafico, Dario de Araújo
Gepubliceerd in: (2008)

Influence of the physical-mechanical properties in the establishment of the coincidence frequency in the sound isolation of masonry walls
door: Paixão, Dinara Xavier da, et al.
Gepubliceerd in: (2008)

Mechanical physical study of concrete substitutes with silica powder exposed in simulated aggressive environment
door: Giménez, Alejandro, et al.
Gepubliceerd in: (2018)

Compressed Earth Blocks (CEB) stabilized with lime and cement. Evaluation of both their environmental impact and compressive strength
door: Cabrera, Santiago Pedro, et al.
Gepubliceerd in: (2020)

Earth construction in Brazil: environmental assessment of rammed earth
door: Caldas, Lucas Rosse, et al.
Gepubliceerd in: (2021)

Evaluation of the petatillo made with cement-sand mortar as an alternative material for the construction of the prefabricated roof component Domotej
door: González García, Eddy, et al.
Gepubliceerd in: (2018)

Reuse of gypsum waste in the execution of internal coating of partition walls
door: Schmitz, Ítalo Benjamin, et al.
Gepubliceerd in: (2009)

Design criteria for educational buildings in the state of Zulia, Venezuela
door: Portillo Ríos, Raymundo
Gepubliceerd in: (2016)

Evaluation of mechanical behavior of ABS and PLA polymers in 3D printing for structural performance simulation
door: Martinez, Andressa Carmo Pena, et al.
Gepubliceerd in: (2019)

Between arms and coats of arms: a look at the railroad development in the interior of São Paulo
door: Ribeiro, Eduardo Bacani
Gepubliceerd in: (2021)

Cool roof coating effect on the superficial temperature of rooftops in a warm and humid weather
door: Porras-Salazar, José Alí, et al.
Gepubliceerd in: (2019)

SAMBA RECEPTION DESK: COMPROMISING AESTHETICS, FABRICATION AND STRUCTURAL PERFORMANCE WITH THE USE OF VIRTUAL AND PHYSICAL MODELS IN THE DESIGN PROCESS
door: Barbosa Neto, Wilson, et al.
Gepubliceerd in: (2014)

The stabilized rammed earth building technique and its use in Australia
door: do Prado Rocha, Rodrigo Amaral, et al.
Gepubliceerd in: (2019)

Transformation in uses of soil in Barbosa. The case of recreational farms
door: Restrepo Uribe, Alejandro, et al.
Gepubliceerd in: (2017)

Drying parameters of rendering mortars
door: Salomão, Maria Cláudia de Freitas, et al.
Gepubliceerd in: (2018)

Earth architecture: An alternative for sustainable construction
door: Zuleta Roa, Gloria
Gepubliceerd in: (2011)

Integration of earth and lime in architectural restorations
door: Guerrero Baca, Luis Fernando, et al.
Gepubliceerd in: (2021)

Modelling proposal for the carbonation of white portland cement concrete
door: Kirchheim, Ana Paula, et al.
Gepubliceerd in: (2008)

Study of the influence of the mortar fine recycled aggregate ratio and the mixing sequence on the behavior of new mortars
door: Silva Neto, Gilberto Alves da, et al.
Gepubliceerd in: (2018)

From the mechanical to the plastic
door: de Esteban Garbayo, Javier
Gepubliceerd in: (2018)

Eight criteria for practice-based research in the creative and cultural industries
door: Büchler, Daniela, et al.
Gepubliceerd in: (2010)

Historical approach to the origins of rammed earth building in Mexico during the sixteenth century
door: Tepale Gamboa, Blas Antonio, et al.
Gepubliceerd in: (2021)