Influence of production systems on the properties of fresh and hardened shotcrete

Influence of production systems on the properties of fresh and hardened shotcrete

In modern shotcrete operations, the mixing and pumping steps are carried out using different production systems and equipment. This adds an element of uncertainty to the process because of variables such as mixer type, rotation speed, mixing time, etc. As a result, this may result in changes to the...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autors principals:	Cechin, Gabriela, Stolz, Carina Mariane, Masuero, Ângela Borges
Format:	Online
Idioma:	eng
Publicat:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2018
Accés en línia:	https://seer.ufrgs.br/ambienteconstruido/article/view/72718
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Influence of polypropylene microfibre (PPMF) dispersion procedure on fresh and hardened rendering mortar properties
per: Dantas, Sérgio Roberto Andrade, et al.
Publicat: (2020)

Influence of cement type and water content on the fresh state properties of ready mix mortar
per: Casali, Juliana Machado, et al.
Publicat: (2018)

Dispositivo para ensaio de resistência de aderência ao cisalhamento em revestimentos: desenvolvimento e validação
per: Stolz, Carina Mariane, et al.
Publicat: (2016)

Influence of the physical-mechanical properties in the establishment of the coincidence frequency in the sound isolation of masonry walls
per: Paixão, Dinara Xavier da, et al.
Publicat: (2008)

The influences of the type of information on the purchase intention and performance expectation of residential real estate properties
per: Dalbosco, Francieli Vargas, et al.
Publicat: (2021)

Calcium hydroxide influence in autogenous self-healing of cement-based materials in various environmental conditions
per: Silva, Deividi Maurente Gomes da, et al.
Publicat: (2021)

Regionalism Revisited: The Case of Francisco Artigas A Fresh Look at a Forgotten Mexican Modernist
per: Eggener, Keith
Publicat: (2016)

A quantitative analysis of production planning and control metrics: impacts of the Last Planner System and factors that affect its effectiveness
per: Moura, Camile Borges, et al.
Publicat: (2009)

Territory setup and jesuit production systems in New Spain
per: Salcedo, Tarsicio Pastrana
Publicat: (2009)

Productive agglomeration and netchains: contributions to value creation in agroindustrial systems
per: Paloschi Tomé, Luiz Henrique, et al.
Publicat: (2020)

Service life of white concretes exposed to chlorides: the influence of the cement and the diffusion coefficient
per: Rizzon, Ana Carina, et al.
Publicat: (2008)

Social and real-property management during infrastructure construction for public transportation systems in five Colombian cities (analytical research)
per: Molina-Prieto, Carlos Alberto, et al.
Publicat: (2011)

Impact on the value of rental and purchase values for residential and commercial properties, related to distance from the axis of the tram system in Cuenca, Ecuador
per: Hermida, Carla, et al.
Publicat: (2018)

Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
per: Valle, Ângela do, et al.
Publicat: (2019)

Energy properties of window technologies in Argentina
per: de Gastines, Maureen, et al.
Publicat: (2019)

Shrinkage and the development of mechanical properties in rendering mortars
per: Bastos, Pedro Kopschitz Xavier, et al.
Publicat: (2008)

Strategic planning in property development: market evidences
per: Balarine, Oscar Fernando Osório
Publicat: (2008)

PROCESS MANAGEMENT ANALYSIS CUSTOMIZATION OF RESIDENTIAL PROPERTIES
per: Pagliaroni, Marco Aurellio Polenghi, et al.
Publicat: (2017)

Local materials and their influence on the morphology of architecture: Local materials and their influence on the morphology of Architecture
per: Montes Ponce, Wendy Margarita, et al.
Publicat: (2019)

Statistical analysis of test methods to evaluate rendering surface properties
per: Carasek, Helena, et al.
Publicat: (2018)

Evaluation of rheological properties of mortar with TiO2 addition
per: Dantas, Sérgio Roberto Andrade, et al.
Publicat: (2021)

Physical and mechanical properties of Eucalyptus saligna wood for timber structures
per: Nogueira, Marta Cristina de Jesus Albuquerque, et al.
Publicat: (2019)

From Ordinances to legal norms: the trajectory of property rights in Brazil
per: Pereira, Gislene
Publicat: (2021)

Impact of the mixer and time of mixing on the properties of industrialized mortar
per: Romano, Roberto Cesar de Oliveira, et al.
Publicat: (2009)

Physical and mechanical properties of bricks with dust residue from marble in México. Physical and mechanical properties of the marble dust-residue from the Comarca Lagunera Province, in Mexico
per: Ponce-Palafox, Cesar, et al.
Publicat: (2020)

Influences of global tourism on the Amazon
per: Ochoa Zuluaga, Germán Ignacio
Publicat: (2019)

The influence of multiculturalism in the architecture of Lima
per: Langschwager Angulo, Ariana
Publicat: (2019)

Influence of the addition of “synthetic termite saliva” in the compressive strength and water absorption of compacted soil-cement
per: Faria, Obede Borges, et al.
Publicat: (2016)

Property of housing and self-stratification of the socioeconomic level of Ecuadorian homes
per: Parrado Rodríguez, Cristhian
Publicat: (2018)

Micro structural research and hydration heat determination in Portland cement pastes with eletric arc furnace dust (EAFD)
per: Vargas, Alexandre Silva de, et al.
Publicat: (2008)

Mechanical properties: wood lumber versus plastic lumber and thermoplastic composites
per: Dias, Bernardo Zandomenico, et al.
Publicat: (2017)

The use of the granite cut residue (GCR) as an admixture in the mechanical properties of concrete
per: Gonçalves, Jardel Pereira, et al.
Publicat: (2008)

Definition of properties and characteristics of common BIM Components from EnergyPlus
per: Ferreira, Sérgio Leal
Publicat: (2015)

Comparison of physical and mechanical properties of traditional concrete and with recycled metal fibers
per: Huamán Changa, Marilyn Del Rosario, et al.
Publicat: (2022)

Estabilização e viabilidade técnica da utilização de escórias de aciaria elétrica
per: Masuero, Angela Borges, et al.
Publicat: (2008)

Influence of binder in the drying shrinkage of fiber cement
per: Giordano, Brunoro Leite, et al.
Publicat: (2009)

The shape of the form and its influence on the design processes
per: Luna Maldonado, Carlos Manuel; Universidad Católica de Pereira, et al.
Publicat: (2017)

The building envelope and its influence on natural lighting
per: Ávila Ramírez, David Carlos, et al.
Publicat: (2015)

The Influence of the Environment in the Public Policies of Spatial Planning
per: Solano Coto, Erick
Publicat: (2016)

Urban green spaces and the influence on vehicular traffic noise control
per: Lopez, Guillermo Angel Perez, et al.
Publicat: (2018)