Structural performance evaluation for prototype walls built with EVA blocks

Structural performance evaluation for prototype walls built with EVA blocks

The utilization of EVA (Ethylene Vinyl Acetate) waste, a byproduct from the production of sandals, in construction projects has been the object of research in the last 10 years. It is known that EVA waste has great potential to be used as lightweight aggregate, replacing natural aggregates in the pr...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autors principals:	Melo, Aluísio Braz, Lima Filho, Marçal Rosas Florentino
Format:	Online
Idioma:	por
Publicat:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2009
Accés en línia:	https://seer.ufrgs.br/ambienteconstruido/article/view/9471
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Heat flow characterization in masonry with EVA blocks
per: Gomes, Emmily Gérsica Santos, et al.
Publicat: (2018)

Rainwater retention by green roof with precast cementitious with EVA
per: Mendonça, Tatyane Martins, et al.
Publicat: (2020)

Desempenho estrutural de um protótipo de alvenaria construída com blocos de terra crua estabilizada
per: Melo, Aluísio Braz, et al.
Publicat: (2011)

Extensive modular green roof: biodiversity and adaptation of plants to TEVA Blocks
per: Mendonça, Tatyane Nadja Martins de, et al.
Publicat: (2017)

Structural behavior evaluation of precast slabs prototypes made with tire rubber residue concrete
per: Trigo, Ana Paula Moreno, et al.
Publicat: (2008)

Acoustic performance of vertical partition in gypsum block: an evaluation in field and laboratory
per: Silva Júnior, Otávio Joaquim da, et al.
Publicat: (2015)

Design and performance evaluation of precast wall panels made with GRG
per: Oliveira, Cláudia Terezinha de, et al.
Publicat: (2008)

Application of thermal performance evaluation methods for assessing wood wall panels
per: Giglio, Thalita Gorban Ferreira, et al.
Publicat: (2008)

Reliability analysis applied to structural ceramic blocks
per: Souza, Daniel de Andrade, et al.
Publicat: (2018)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
per: Oliveira, Maria Fernanda de, et al.
Publicat: (2021)

Recycled gypsum block: development and performance
per: Santana, Clóvis Veloso, et al.
Publicat: (2019)

Evaluation of wall retrofits in frequently-built housing in Chile using energy simulation and life cycle cost analysis
per: Muñoz Fierro, Jorge, et al.
Publicat: (2015)

Numerical and experimental analysis of the shear capacity of interconnected concrete block walls
per: Oliveira, Luciane Marcela Filizola de, et al.
Publicat: (2017)

Performance of grouts in the wall tiling system
per: Paes, Isaura Nazaré Lobato, et al.
Publicat: (2008)

Acoustical performance of Brazilian dwellings: party walls
per: Duarte, Elisabeth de Albuquerque Cavalcanti, et al.
Publicat: (2008)

RESIDENTIAL BUILDING DESIGN CONSIDERING THE BRAZILIAN PERFORMANCE STANDARD: ANALYSES TO WALL PARTITION
per: Oliveira, Luciana Alves, et al.
Publicat: (2012)

Using ready-mixed mortars in concrete block structural masonry
per: Matos, Paulo Ricardo de, et al.
Publicat: (2020)

Evaluation of mechanical behavior of ABS and PLA polymers in 3D printing for structural performance simulation
per: Martinez, Andressa Carmo Pena, et al.
Publicat: (2019)

Contribution of the component and thickness in acoustic performance of wall partitions
per: Andrade, Fábia Kamilly Gomes de, et al.
Publicat: (2018)

Influence of green walls on the thermal performance of social housing
per: Sousa, Luana Resende de, et al.
Publicat: (2020)

Analysis of the reinforcement of an informally constructed structure using walls jacketing
per: Herrera, Melisa, et al.
Publicat: (2022)

Daylight performance evaluation in residential environments
per: Danieleski, Cristina Biazus, et al.
Publicat: (2019)

Performance assessment of walls using the Analytic Hierarchy Process in decision-making
per: Caldas, Lucas Rosse, et al.
Publicat: (2018)

Analysis of the thermal performance of social housing with concrete walls in Uberlândia-MG
per: Oliveira, Roberta Bastos de, et al.
Publicat: (2021)

Physics mechanics and chemical evaluation on walls used after fire
per: Valero, Diana, et al.
Publicat: (2015)

From prototypical to prototyping: mass-customization versus 20th century utopias in architecture and urban design
per: Celani, Gabriela, et al.
Publicat: (2016)

Methodological proposal for evaluation of performance facade lighting
per: Giraldo Vásquez, Natalia; Universidad Católica de Pereira, et al.
Publicat: (2016)

Ventilated cladding systems: structural and drainability performance criteria
per: Silva, Luiz Fernando Batista da, et al.
Publicat: (2018)

Performance of tall buildings with employment of soil-structure interaction
per: Bahia, Gabriela de Athayde Duboc, et al.
Publicat: (2021)

Microstructural characterization in HEC and EVA modified cement pastes
per: Silva, Denise Antunes da, et al.
Publicat: (2008)

Prototype design of a tensioned retractable roof.
per: Morales Guzmán, Carlos César
Publicat: (2013)

Evaluation of the thermal performance of the ashlar (ignimbrite) of Arequipa, Peru.
per: Herrera-Sosa, Luis Carlos, et al.
Publicat: (2020)

Compressed Earth Blocks (CEB) stabilized with lime and cement. Evaluation of both their environmental impact and compressive strength
per: Cabrera, Santiago Pedro, et al.
Publicat: (2020)

Advertising and female representation in Women's magazines: an approximation to the case of Eva magazine
per: Vergara Leyton, Enrique, et al.
Publicat: (2020)

Evaluation of the performance of plumbing fixtures in public sports facilities in Brazil
per: Gonçalves, Felipe, et al.
Publicat: (2020)

Evaluation method for building performance in Light Wood Frame in Brazil
per: Sotsek, Nicolle Christine, et al.
Publicat: (2020)

The confort in the environment built:: technique, ambience and subjectivity
per: Freitas Filho, Hermano Braga Viriato de, et al.
Publicat: (2018)

The wall
per: Rosenmann, Igor
Publicat: (2017)

Tuhouse: Sustainable, high-density social housing prototype for the tropics
per: Cobo-Fray, Constanza, et al.
Publicat: (2021)

CAD/CAM learning processes: from geometric iterations to prototypes
per: Véliz Fadic, Felipe
Publicat: (2020)