Comparative analysis of the strength to compression, flexure and workability of traditional concrete versus a concrete using steel slag as fine aggregate

Comparative analysis of the strength to compression, flexure and workability of traditional concrete versus a concrete using steel slag as fine aggregate

The objective of this research is to determine the influence of slag as a global aggregate on compressive strength, bending and workability for a concrete f'c=20594 kPa. Steel slag was used in 10%, 15% and 20% as fine aggregate, in this way an alternative for the use of recycled materials is sh...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autors principals:	Camarena Flores, Armando, Díaz Garamendi, David
Format:	Online
Idioma:	spa
Publicat:	Universidad Centroccidental Lisandro Alvarado - Decanato de Ingeniería Civil 2022
Accés en línia:	https://revistas.uclave.org/index.php/gt/article/view/3714
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Steel fibers in the resistance to compression of the concrete
per: Farfán Córdova, Marlon, et al.
Publicat: (2019)

Effect of exposure time to fire in flexural strength of reinforced concrete beams
per: Ureña Aguirre, Maritza Elizabeth, et al.
Publicat: (2018)

Application of curing methods and their influence on the compression strength of concrete
Publicat: (2022)

Reliability of the ultrasonic pulse velocity for analysis and comparison of the compression strength of conventional concrete with addition of steel fiber and polypropylene
per: Jaramillo Machacua, Honorio Rigoberto, et al.
Publicat: (2023)

Use of electric arc furnace slag for producing concrete paving blocks
per: Penteado, Carmenlucia Santos Giordano, et al.
Publicat: (2019)

Comparison of physical and mechanical properties of traditional concrete and with recycled metal fibers
per: Huamán Changa, Marilyn Del Rosario, et al.
Publicat: (2022)

Study of the compression strength and water absorption of concretes produced with addition of construction and demolition rubble and sludge from water treatment stations
per: Sales, Almir, et al.
Publicat: (2008)

Evaluation of the chemical strength of polymeric concretes in aggressive environments
per: Gorninski, Jane Proszek, et al.
Publicat: (2008)

Influence of the moisture content on the dynamic modulus of elasticity of concrete made with recycled aggregate
per: Kazmierczak, Claudio de Souza, et al.
Publicat: (2019)

Technical evaluation of resistance to compression in concretes made with CPCA cement
per: Rincon, Marcos, et al.
Publicat: (2016)

Total shrinkage and chloride ion penetration in concretes made with white Portland cement and blast furnace slag
per: Dellinghausen, Luciano Medeiros, et al.
Publicat: (2009)

Compressed Earth Blocks (CEB) stabilized with lime and cement. Evaluation of both their environmental impact and compressive strength
per: Cabrera, Santiago Pedro, et al.
Publicat: (2020)

Study of the influence of the mortar fine recycled aggregate ratio and the mixing sequence on the behavior of new mortars
per: Silva Neto, Gilberto Alves da, et al.
Publicat: (2018)

Temperature and moisture content effects on compressive strength parallel to the grain of paricá
per: Figueroa, Manuel Jesús Manríquez, et al.
Publicat: (2014)

Non-linear analysis of an experimental joint of column and beams of armed concrete-steel column for portics
per: López, Nelson, et al.
Publicat: (2017)

Analysis of a joint base plate between concrete column-steel columns in the non-linear range
per: López, Nelson, et al.
Publicat: (2019)

Influence of the addition of “synthetic termite saliva” in the compressive strength and water absorption of compacted soil-cement
per: Faria, Obede Borges, et al.
Publicat: (2016)

Concretes with binary mixtures of artificial pozzolans and concrete demolition waste
per: Lima, Cristian Jonathan Franco de, et al.
Publicat: (2020)

Concrete world heritage
per: González Cárdenas, María Margarita
Publicat: (2005)

Towards the concrete utopia
per: Vergara-Perucich, José Francisco, et al.
Publicat: (2018)

New shapes for concrete columns
per: Garcia Alvarado, Rodrigo, et al.
Publicat: (2018)

Concrete Errors, or The Magic of Shells
per: González Pendás, María
Publicat: (2018)

Recycled concrete: chances to research in pre graduate
per: Rivera, Emely, et al.
Publicat: (2020)

Infill shear walls in precast concrete frames
per: Medeiros, Wallison Angelim, et al.
Publicat: (2018)

Formwork fabrication freedom for a concrete canoe
per: Jipa, Andrei, et al.
Publicat: (2019)

Determination the probability distribution of the concrete mixing components
per: Suárez Pereira, Mariana, et al.
Publicat: (2021)

High quality of mortar with marble waste aggregate
per: Barbosa, Maria Teresa Gomes, et al.
Publicat: (2018)

The artificial sand x natural sand for concrete production
per: Barbosa, Maria Teresa Gomes, et al.
Publicat: (2008)

Modelling proposal for the carbonation of white portland cement concrete
per: Kirchheim, Ana Paula, et al.
Publicat: (2008)

Museum of Contemporary Art in Niterói: lightness moulded in concrete
per: Neiva, Simone
Publicat: (2021)

Experiences with reinforced concrete in portuguese africa: the Brazilian influence
per: Milheiro, Ana Vaz
Publicat: (2009)

Strengthening concrete beams with fiberglass reinforced polymer layers
per: Busnelli, Alberto Pedro, et al.
Publicat: (2016)

Using ready-mixed mortars in concrete block structural masonry
per: Matos, Paulo Ricardo de, et al.
Publicat: (2020)

GFRP: assessing load transfer from bar surface to concrete
per: Castro, Protásio Ferreira e
Publicat: (2008)

Evaluation of corrosion in armed concrete elements exposed to the marine environment
per: Castro Luque, Liliana, et al.
Publicat: (2008)

Synergistic effect of RHA and FCW in alkali-aggregate reaction mitigation
per: Guillante, Patrícia, et al.
Publicat: (2019)

Estimation of damage caused by carbonation in reinforced concrete structures in Nirgua city
per: Peña, Diego, et al.
Publicat: (2022)

Numerical and experimental analysis of the shear capacity of interconnected concrete block walls
per: Oliveira, Luciane Marcela Filizola de, et al.
Publicat: (2017)

Experimental analysis on the combined effects of corrosion and fatigue in reinforced concrete beams
per: Stein, Kássio Joe, et al.
Publicat: (2019)

The use of the granite cut residue (GCR) as an admixture in the mechanical properties of concrete
per: Gonçalves, Jardel Pereira, et al.
Publicat: (2008)