Shrinkage and the development of mechanical properties in rendering mortars

Shrinkage and the development of mechanical properties in rendering mortars

This research discusses shrinkage and the development of mechanical properties in mortars made of cement, lime and sand 1:1:6 (volume), and in compositions with varying content of lime. Technology innovation was sought for in what concerns laboratory tests similar to real rendering conditions. The t...

Shranjeno v:

Bibliografske podrobnosti
Main Authors:	Bastos, Pedro Kopschitz Xavier, Détriché, Charles-Henri, Balayssac, Jean-Paul, Cincotto, Maria Alba
Format:	Online
Jezik:	por
Izdano:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2008
Online dostop:	https://seer.ufrgs.br/ambienteconstruido/article/view/3418
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Influence of polypropylene microfibre (PPMF) dispersion procedure on fresh and hardened rendering mortar properties
od: Dantas, Sérgio Roberto Andrade, et al.
Izdano: (2020)

Drying parameters of rendering mortars
od: Salomão, Maria Cláudia de Freitas, et al.
Izdano: (2018)

Evaluation of early age cracking in rendering mortars with polypropylene fibers
od: Monte, Renata, et al.
Izdano: (2018)

Influence of testing parameters on the determination of the bond strength of mortar renderings
od: Costa, Eliane Betânia Carvalho, et al.
Izdano: (2009)

Comparative analysis of the properties of composite mortar with addition of rubber powder from worn tires
od: Canova, José Aparecido, et al.
Izdano: (2012)

Statistical analysis of test methods to evaluate rendering surface properties
od: Carasek, Helena, et al.
Izdano: (2018)

Analysing the logistics impact on the cost composition of a mechanised spraying process of rendering mortar
od: Brandstetter, Maria Carolina Gomes de Oliveira, et al.
Izdano: (2018)

Impact of the mixer and time of mixing on the properties of industrialized mortar
od: Romano, Roberto Cesar de Oliveira, et al.
Izdano: (2009)

Influence of the physical-mechanical properties in the establishment of the coincidence frequency in the sound isolation of masonry walls
od: Paixão, Dinara Xavier da, et al.
Izdano: (2008)

Evaluation of rheological properties of mortar with TiO2 addition
od: Dantas, Sérgio Roberto Andrade, et al.
Izdano: (2021)

Physical and mechanical properties of Eucalyptus saligna wood for timber structures
od: Nogueira, Marta Cristina de Jesus Albuquerque, et al.
Izdano: (2019)

Influence of binder in the drying shrinkage of fiber cement
od: Giordano, Brunoro Leite, et al.
Izdano: (2009)

Physical and mechanical properties of bricks with dust residue from marble in México. Physical and mechanical properties of the marble dust-residue from the Comarca Lagunera Province, in Mexico
od: Ponce-Palafox, Cesar, et al.
Izdano: (2020)

Effect of set retarder on the hydratation mechanism and microestructure of plaster of Paris
od: Hincapie, Angela Maria, et al.
Izdano: (2008)

The use of the granite cut residue (GCR) as an admixture in the mechanical properties of concrete
od: Gonçalves, Jardel Pereira, et al.
Izdano: (2008)

Mechanical properties: wood lumber versus plastic lumber and thermoplastic composites
od: Dias, Bernardo Zandomenico, et al.
Izdano: (2017)

Comparison of physical and mechanical properties of traditional concrete and with recycled metal fibers
od: Huamán Changa, Marilyn Del Rosario, et al.
Izdano: (2022)

Physical-mechanical performance criteria of cement-soil mortars for earth building coating
od: Milani, Ana Paula da Silva, et al.
Izdano: (2018)

Influence of cement type and water content on the fresh state properties of ready mix mortar
od: Casali, Juliana Machado, et al.
Izdano: (2018)

Correlation between modulus of elasticity dynamic and mechanical strengths of cement mortars and sand with lime addition
od: Silva, Narciso Gonçalves da, et al.
Izdano: (2008)

The influence of water loss by evaporation in the tensile adhesion strength between dry-set mortar and ceramic tiles
od: Póvoas, Yêda Vieira, et al.
Izdano: (2008)

Strategic planning in property development: market evidences
od: Balarine, Oscar Fernando Osório
Izdano: (2008)

The feasibility of using natural rice husk ash in structural concrete. Part I: mechanical properties and microstructure
od: Isaia, Geraldo Cechella, et al.
Izdano: (2010)

Rendering Differentials: Introjective Architecture In The Age Of The Digital
od: Bernath, Doreen
Izdano: (2013)

Porosity estimation of cement-lime mortar through the volume calculation method
od: Quarcioni, Valdecir Angelo, et al.
Izdano: (2009)

Total shrinkage and chloride ion penetration in concretes made with white Portland cement and blast furnace slag
od: Dellinghausen, Luciano Medeiros, et al.
Izdano: (2009)

Study of the influence of the mortar fine recycled aggregate ratio and the mixing sequence on the behavior of new mortars
od: Silva Neto, Gilberto Alves da, et al.
Izdano: (2018)

From the mechanical to the plastic
od: de Esteban Garbayo, Javier
Izdano: (2018)

From mechanics to Digital Materiality
od: Gronda, Arq. María Luciana
Izdano: (2019)

The mechanics of prodiction of “urban imaginaries”
od: Campos Medina, Luis Alfredo, et al.
Izdano: (2015)

High quality of mortar with marble waste aggregate
od: Barbosa, Maria Teresa Gomes, et al.
Izdano: (2018)

Mortar with refractory waste for passive fire protection
od: Lima, Paulo Henrique Pereira, et al.
Izdano: (2020)

Binders, mortars and plasters appropriate to protect the environment.
od: Cedeño Valdiviezo, Alberto
Izdano: (2011)

Energy properties of window technologies in Argentina
od: de Gastines, Maureen, et al.
Izdano: (2019)

A propos des relations entre nature et ville . Bilan des dialogues franco-lusophones de Tours: es questionnements pour des recherches futures
od: Carrière, Jean-Paul
Izdano: (2020)

An investigation on the limitations of photographic printing systems for fine art reproduction: a comparison of perceptual and colorimetric rendering intents
od: Mortara, Bruno Arruda
Izdano: (2015)

PROCESS MANAGEMENT ANALYSIS CUSTOMIZATION OF RESIDENTIAL PROPERTIES
od: Pagliaroni, Marco Aurellio Polenghi, et al.
Izdano: (2017)

Mechanisms of socio-urban reification of muralism in Valparaíso
od: Cañete Islas, Omar
Izdano: (2019)

Using ready-mixed mortars in concrete block structural masonry
od: Matos, Paulo Ricardo de, et al.
Izdano: (2020)

Structural reinforcement in townhouses by covering masonry with welded mesh and mortar
od: Castillo Robles, Cristhian, et al.
Izdano: (2022)