Standardization of adhesives for tiles and grouts for ceramic tiles

Standardization of adhesives for tiles and grouts for ceramic tiles

This paper discusses the standardization of adhesives for tiles and grouts for ceramic tiles. An experimental study was conducted on grouts for tiles in order to determine consistency and water retention rates, flexural and compressive strength, water absorption by capillary and the permeability of...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autors principals:	Bauer, Roberto José Falcão, Rago, Fabíola
Format:	Online
Idioma:	por
Publicat:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2008
Accés en línia:	https://seer.ufrgs.br/ambienteconstruido/article/view/3419
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Performance of grouts in the wall tiling system
per: Paes, Isaura Nazaré Lobato, et al.
Publicat: (2008)

The influence of water loss by evaporation in the tensile adhesion strength between dry-set mortar and ceramic tiles
per: Póvoas, Yêda Vieira, et al.
Publicat: (2008)

Analysis of the stresses in the interface between dry-set mortar and ceramic tiles under thermic efforts
per: Saraiva, Ana Gabriela, et al.
Publicat: (2008)

Application of the NORIE-LACER-LOPP model for estimating the life cycle of glazed ceramic tiles under abrasion
per: Abitante, Ana Luiza Raabe, et al.
Publicat: (2008)

Estimating the embodied energy in ceramic bricks, blocks and tile production materials in the State of Rio Grande do Sul
per: Manfredini, Constance, et al.
Publicat: (2008)

Modern ornaments: portinary's tiles in Pampulha church
per: Pinto Junior, Rafael Alves
Publicat: (2008)

Iron ore tailings in the production of cement tiles: a value analysis on building sustainability
per: Fontes, Wanna Carvalho, et al.
Publicat: (2018)

Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
per: Valle, Ângela do, et al.
Publicat: (2019)

Cruz Azul and Tolteca: Cement Standardization and Biopolitics in Post-Revolutionary Advertising
per: Hernandez Flores, Fabiola
Publicat: (2020)

Castor oil based polyurethane adhesive content on OSSB produced with soybean straw
per: Silva, João Vítor Felippe, et al.
Publicat: (2020)

Reliability analysis applied to structural ceramic blocks
per: Souza, Daniel de Andrade, et al.
Publicat: (2018)

Standards for the Need of Equipments?
per: Pavez Reyes, María Isabel
Publicat: (1998)

Portlandite consumption by red ceramic waste due to alkali activation reaction
per: Macioski, Gustavo, et al.
Publicat: (2020)

Soil characterisation used in ceramic industries and an analysis of its feasibility in ecological bricks
per: Queiroz, Abílio José Procópio, et al.
Publicat: (2021)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
per: Oliveira, Maria Fernanda de, et al.
Publicat: (2021)

Analysis of artificial lighting standards for residential buildings
per: Moraes, Júlia Silva de, et al.
Publicat: (2018)

Study of the hydration of Portland cement pastes containing ceramic waste by thermal analysis
per: Gonçalves, Jardel Pereira, et al.
Publicat: (2008)

Environmental strategies for the red ceramic industry from the State of Rio Grande do Sul
per: Grigoletti, Giane de Campos, et al.
Publicat: (2008)

Study of minimum standards of flexibility for social housing in Bogotá.
per: Cubillos González, Rolando Arturo
Publicat: (2012)

Living (in) the house. Changes in the transforming standards and values in the constructed surroundings
per: Di Paula, Jorge
Publicat: (2007)

Development of plug-ins focused on analyzing requirements of the Brazilian Performance Standard
per: Silva, Juliano Lima da, et al.
Publicat: (2019)

Space standards that apply to the construction of social housing: a comparison between Portugal and the municipality of São Paulo
per: Pedro, João Branco, et al.
Publicat: (2012)

New requirements resulting from construction environmental certification programs and performance standards
per: Silva, Adriana Teresinha, et al.
Publicat: (2015)

RESIDENTIAL BUILDING DESIGN CONSIDERING THE BRAZILIAN PERFORMANCE STANDARD: ANALYSES TO WALL PARTITION
per: Oliveira, Luciana Alves, et al.
Publicat: (2012)

Climate parameters for thermal performance simulation according to the Brazilian standard NBR 15.575
per: Guarda, Emeli Lalesca Aparecida da, et al.
Publicat: (2020)

Municipal environment and conservation standards in Colombia: ¿protected areas, ecological networks or green infrastructures?
per: Remolina-Angarita, Fernando
Publicat: (2011)

Determination of sky models from ISO CIE 15469- 2004 standard using climate files
per: Claro, Anderson
Publicat: (2018)

Efficiency evaluation of grease traps prescribed by the Brazilian standard NBR 8160:1999 as natural flotation basins
per: Gnipper, Sérgio Frederico
Publicat: (2008)

From Minimum Quality Standards to project strategies: disciplinary contributions to the technical parameters of Social Housing in Argentina
per: Fiscarelli, Diego; Laboratorio de Tecnología y Gestión Habitacional LATEC. Facultad de Arquitectura y Urbanismo. UNLP, et al.
Publicat: (2020)

Performance ratings of impact noise insulation materials using the tapping machine and a non-standardized source
per: Panosso, Andriele da Silva, et al.
Publicat: (2020)

The social interest housing decrees and the loosening of land use standards in the city of São Paulo from 1992 to 2016
per: Teixeira, Catharina Christina
Publicat: (2018)

Study of low-income housing and low-income market housing in the zeis (special zones of social interest) in the lapa district of sao paulo, brazil, following the 2002 master plan
per: Falcão Pessoa, Denise
Publicat: (2009)

On the Visual Agency of Manufacturing Models
per: Bauer, Frank
Publicat: (2021)

Demand for material in regular steel structures with and without braces in seismic zone in high risk according to the Standard Covenin 1618-1998
per: Montesinos, Vanessa Viviana, et al.
Publicat: (2015)

Program Kaiser Connex for Kaiser Bolted Bracket type seismo-resistant connections according to the ansi/aisc 358-16 standard
per: Chirino Alvarado, Kevin Jesús, et al.
Publicat: (2023)

QUALI-QUANTITATIVE ANALYSIS OF THE BRAZILIAN PERFORMANCE STANDARD (NBR no. 15,575/2013) AND MAIN CHALLENGES FOR UPPER LEVEL IMPLEMENTATION ON RESIDENTIAL MULTIFLOOR BUILDINGS
per: Souza, Jonas Leonardo Pessanha de, et al.
Publicat: (2018)

Comparative analysis of the structural design of a regular and irregular building of eight levels in a ports system applying standard E.030 2003, 2016 and 2018 seismic resistant design in the city of Lima
per: De La Cruz Alvarez, Jorge Eduardo, et al.
Publicat: (2022)

Evaluation of methods for measuring driving rain on buildings facades
per: Zanoni, Vanda Alice Garcia, et al.
Publicat: (2018)

O virtual de baixa resolução: entre a visibilidade e a ilusão
per: Ribeiro, Fabíola Macêdo
Publicat: (2007)

Homely Town. Modelo Habitacional Moín
per: Sanabria Hidalgo, Fabiola
Publicat: (2017)