Standardization of adhesives for tiles and grouts for ceramic tiles

Standardization of adhesives for tiles and grouts for ceramic tiles

This paper discusses the standardization of adhesives for tiles and grouts for ceramic tiles. An experimental study was conducted on grouts for tiles in order to determine consistency and water retention rates, flexural and compressive strength, water absorption by capillary and the permeability of...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Main Authors:	Bauer, Roberto José Falcão, Rago, Fabíola
Format:	Online
Sprog:	por
Udgivet:	ANTAC - Associação Nacional de Tecnologia do Ambiente Construído 2008
Online adgang:	https://seer.ufrgs.br/ambienteconstruido/article/view/3419
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Performance of grouts in the wall tiling system
af: Paes, Isaura Nazaré Lobato, et al.
Udgivet: (2008)

The influence of water loss by evaporation in the tensile adhesion strength between dry-set mortar and ceramic tiles
af: Póvoas, Yêda Vieira, et al.
Udgivet: (2008)

Analysis of the stresses in the interface between dry-set mortar and ceramic tiles under thermic efforts
af: Saraiva, Ana Gabriela, et al.
Udgivet: (2008)

Application of the NORIE-LACER-LOPP model for estimating the life cycle of glazed ceramic tiles under abrasion
af: Abitante, Ana Luiza Raabe, et al.
Udgivet: (2008)

Estimating the embodied energy in ceramic bricks, blocks and tile production materials in the State of Rio Grande do Sul
af: Manfredini, Constance, et al.
Udgivet: (2008)

Modern ornaments: portinary's tiles in Pampulha church
af: Pinto Junior, Rafael Alves
Udgivet: (2008)

Iron ore tailings in the production of cement tiles: a value analysis on building sustainability
af: Fontes, Wanna Carvalho, et al.
Udgivet: (2018)

Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
af: Valle, Ângela do, et al.
Udgivet: (2019)

Cruz Azul and Tolteca: Cement Standardization and Biopolitics in Post-Revolutionary Advertising
af: Hernandez Flores, Fabiola
Udgivet: (2020)

Castor oil based polyurethane adhesive content on OSSB produced with soybean straw
af: Silva, João Vítor Felippe, et al.
Udgivet: (2020)

Reliability analysis applied to structural ceramic blocks
af: Souza, Daniel de Andrade, et al.
Udgivet: (2018)

Standards for the Need of Equipments?
af: Pavez Reyes, María Isabel
Udgivet: (1998)

Portlandite consumption by red ceramic waste due to alkali activation reaction
af: Macioski, Gustavo, et al.
Udgivet: (2020)

Soil characterisation used in ceramic industries and an analysis of its feasibility in ecological bricks
af: Queiroz, Abílio José Procópio, et al.
Udgivet: (2021)

Influence of ceramic block geometry and mortar coating on the sound reduction of walls
af: Oliveira, Maria Fernanda de, et al.
Udgivet: (2021)

Analysis of artificial lighting standards for residential buildings
af: Moraes, Júlia Silva de, et al.
Udgivet: (2018)

Study of the hydration of Portland cement pastes containing ceramic waste by thermal analysis
af: Gonçalves, Jardel Pereira, et al.
Udgivet: (2008)

Environmental strategies for the red ceramic industry from the State of Rio Grande do Sul
af: Grigoletti, Giane de Campos, et al.
Udgivet: (2008)

Study of minimum standards of flexibility for social housing in Bogotá.
af: Cubillos González, Rolando Arturo
Udgivet: (2012)

Living (in) the house. Changes in the transforming standards and values in the constructed surroundings
af: Di Paula, Jorge
Udgivet: (2007)

Development of plug-ins focused on analyzing requirements of the Brazilian Performance Standard
af: Silva, Juliano Lima da, et al.
Udgivet: (2019)

Space standards that apply to the construction of social housing: a comparison between Portugal and the municipality of São Paulo
af: Pedro, João Branco, et al.
Udgivet: (2012)

New requirements resulting from construction environmental certification programs and performance standards
af: Silva, Adriana Teresinha, et al.
Udgivet: (2015)

RESIDENTIAL BUILDING DESIGN CONSIDERING THE BRAZILIAN PERFORMANCE STANDARD: ANALYSES TO WALL PARTITION
af: Oliveira, Luciana Alves, et al.
Udgivet: (2012)

Climate parameters for thermal performance simulation according to the Brazilian standard NBR 15.575
af: Guarda, Emeli Lalesca Aparecida da, et al.
Udgivet: (2020)

Municipal environment and conservation standards in Colombia: ¿protected areas, ecological networks or green infrastructures?
af: Remolina-Angarita, Fernando
Udgivet: (2011)

Determination of sky models from ISO CIE 15469- 2004 standard using climate files
af: Claro, Anderson
Udgivet: (2018)

Efficiency evaluation of grease traps prescribed by the Brazilian standard NBR 8160:1999 as natural flotation basins
af: Gnipper, Sérgio Frederico
Udgivet: (2008)

From Minimum Quality Standards to project strategies: disciplinary contributions to the technical parameters of Social Housing in Argentina
af: Fiscarelli, Diego; Laboratorio de Tecnología y Gestión Habitacional LATEC. Facultad de Arquitectura y Urbanismo. UNLP, et al.
Udgivet: (2020)

Performance ratings of impact noise insulation materials using the tapping machine and a non-standardized source
af: Panosso, Andriele da Silva, et al.
Udgivet: (2020)

The social interest housing decrees and the loosening of land use standards in the city of São Paulo from 1992 to 2016
af: Teixeira, Catharina Christina
Udgivet: (2018)

Study of low-income housing and low-income market housing in the zeis (special zones of social interest) in the lapa district of sao paulo, brazil, following the 2002 master plan
af: Falcão Pessoa, Denise
Udgivet: (2009)

On the Visual Agency of Manufacturing Models
af: Bauer, Frank
Udgivet: (2021)

Demand for material in regular steel structures with and without braces in seismic zone in high risk according to the Standard Covenin 1618-1998
af: Montesinos, Vanessa Viviana, et al.
Udgivet: (2015)

Program Kaiser Connex for Kaiser Bolted Bracket type seismo-resistant connections according to the ansi/aisc 358-16 standard
af: Chirino Alvarado, Kevin Jesús, et al.
Udgivet: (2023)

QUALI-QUANTITATIVE ANALYSIS OF THE BRAZILIAN PERFORMANCE STANDARD (NBR no. 15,575/2013) AND MAIN CHALLENGES FOR UPPER LEVEL IMPLEMENTATION ON RESIDENTIAL MULTIFLOOR BUILDINGS
af: Souza, Jonas Leonardo Pessanha de, et al.
Udgivet: (2018)

Comparative analysis of the structural design of a regular and irregular building of eight levels in a ports system applying standard E.030 2003, 2016 and 2018 seismic resistant design in the city of Lima
af: De La Cruz Alvarez, Jorge Eduardo, et al.
Udgivet: (2022)

Evaluation of methods for measuring driving rain on buildings facades
af: Zanoni, Vanda Alice Garcia, et al.
Udgivet: (2018)

O virtual de baixa resolução: entre a visibilidade e a ilusão
af: Ribeiro, Fabíola Macêdo
Udgivet: (2007)

Homely Town. Modelo Habitacional Moín
af: Sanabria Hidalgo, Fabiola
Udgivet: (2017)